Requests, queues, and QC for mass spectrometry cores
Take quantification, accurate mass, GC-MS, ICP-MS, and MALDI-TOF requests with sample sheets, run a walk-up LC-MS queue, record pass or fail QC on samples and instruments, and bill the work.

Set up as a mass spectrometry core
Setup adds 12 instruments, 8 services, and 28 maintenance plans.
Follow a request through the core
Pick a service, send the request, and take it through to the invoice.
Services
Targeted quantification (LC-MS/MS)
The compounds you choose, such as drugs, hormones, lipids, or neurotransmitters, measured by LC-MS/MS against a calibration curve with internal standards. You get the amount of each in each sample.
Paste rows from a spreadsheet, or add them one at a time.
Estimated charge $1,080.00
$45.00 per sample × 24 samples.
This brings Aging cohort to $9,080.00 of its $10,000.00 budget.
Who it is for
Mass spectrometry cores
A mass spectrometry core runs staff work by request, from method development to quantification, and keeps a walk-up instrument for chemists, with QC on every batch and every instrument. ConductCommons keeps each request with its samples, QC results, stages, staff time, standards, and bill, and each instrument with its queue, QC, maintenance, and problems.
What comes set up for a mass spectrometry core
12instruments
8services
28maintenance plans
See every instrument, service, and plan
Instruments12
Triple quadrupole LC-MS/MS (2)
Mass spectrometer
GC-MS system
ICP-MS system
MALDI-TOF mass spectrometer
Open-access LC-MS
HPLC system
Nitrogen evaporator
Centrifuge
Data processing workstation (2)
Services8
Targeted quantification (LC-MS/MS)
per sample, about 14 days, 6 stages
Accurate mass (HRMS)
per sample, about 3 days, 4 stages
Compound identification
per sample, about 10 days, 5 stages
GC-MS analysis
per sample, about 10 days, 5 stages
Elemental analysis (ICP-MS)
per sample, about 10 days, 5 stages
MALDI-TOF analysis
per sample, about 3 days, 4 stages
Method development
by the hour
Mass spectrometry data analysis help
by the hour
Maintenance plans28
Run the system suitability standard
every week, on 3 instruments
Mass calibration
every week, on 3 instruments
Tune and calibrate
every month, on 2 instruments
Clean the ion source
every month, on 4 instruments
Autotune
every week, on 1 instrument
Change the inlet liner and septum
every month, on 1 instrument
Run the performance check
every week, on 1 instrument
Clean the cones
every month, on 1 instrument
Purge the pumps and check the pressure
every month, on 2 instruments
Archive raw files and clear space
every month, on 2 instruments
Preventive maintenance visit
every year, on 8 instruments
You can also download free request forms and maintenance logs for this kind of core.
What the core runs
The instruments behind the work
Choose Mass spectrometry when you set up the core, and these open with their booking rules and the walk-up queue, along with eight services with their stages and usual QC checks, and the maintenance plans. Change anything later, and add any instrument your core shares. Pick an instrument to see its booking rules and maintenance plans.
Instrument status
Updated 10:42 AM on Oct 13; refreshes every minute.
- 1 in use
- 1 booked
- 1 training
- 1 down
- 8 free
Booking rules
- Training
- Needed before booking
- Approval
- A manager approves each reservation
- Session
- 1 hour to 3 days
- Charged for
- Actual usage, check-in to check-out
Preventive maintenance
Managers are emailed before each one is due.
Run the system suitability standard
every week · next due Oct 19
Tune and calibrate
every month · next due Oct 31
Clean the ion source
every month · next due Oct 24
Preventive maintenance visit
every year · next due Jun 26
Triple quadrupole LC-MS/MS
Run by staff for targeted quantification, with system suitability, tuning, and source cleaning on the calendar
High-resolution mass spectrometer
Accurate mass and compound identification, with a weekly mass calibration
GC-MS, ICP-MS, and MALDI-TOF
Fatty acids and volatiles, trace elements, and the mass of proteins, peptides, and polymers
Walk-up LC-MS
Chemists queue their own samples after training, with a night queue for long runs
Sample preparation and data
HPLC, nitrogen evaporator, centrifuge, and two data processing workstations
How it fits mass spectrometry work
From the sample to the result that goes back
Before the work
Researchers name the compounds and sample type, then list samples with group and amount.
Targeted quantification (LC-MS/MS)
24 samples, every row checked
| Sample name or ID | Group | Volume or mass |
|---|---|---|
| S-01 | Control | 100 µL |
| S-02 | Control | 100 µL |
| S-03 | Treated | 100 µL |
and 21 more samples
Trained chemists add samples with the minutes each needs. Longer runs wait for the night hours you set.
Runs today
Up to 15 minutes by day. Longer runs wait for 7 PM to 7 AM.
- Running now
Priya Shah, 20 minutes
- Next
Marcus Lee, 25 minutes
- Night queue
Sam Okafor, 3 hours
During the work
Each stage has a target in days. Researchers see where their samples are and when the results should arrive.
Targeted quantification (LC-MS/MS)
SR-0042 · Chen Lab
- Done
Received
- Done
Method setup
Target 3 days
- In progress
Extraction
Target 3 days
- Not started
LC-MS/MS
Target 4 days
- Not started
Quantification
Target 3 days
- Not started
Delivered
Staff record each check with a value, for each sample or the whole request.
QC
SR-0042 · Targeted quantification (LC-MS/MS)
- Pass
Calibration curve
24 of 24 samples
- Pass
QC sample accuracy
Whole request
- Pass
Carryover blank
Whole request
Recorded by Elena Rossi, Oct 15
Staff log their time by stage. Method development bills by the hour from the time logged.
Staff time
SR-0042 · Assigned to Elena Rossi · Due Oct 26
- Method setup1.5 hours
- Extraction6 hours
- LC-MS/MS4 hours
- Quantification2 hours
Supplies come out of stock when a request is done. Managers are emailed at the reorder point.
Taken from stock
Completed requests, Oct 15
- Taken
Internal standard mix
per request
- At reorder point
Derivatization reagent
per sample
After the work
Requests charged to a project can wait for its PI. Completed requests and queued runs go on one monthly statement.
INV-0014
Chen Lab · Aging cohort
- $540.00
Targeted quantification (LC-MS/MS)
12 samples at $45.00
- $1,080.00
Accurate mass (HRMS)
24 samples at $45.00
- $270.00
Compound identification
6 samples at $45.00
Total (USD)$1,890.00
See turnaround, staff hours, and QC pass rates. Download any table as CSV for funding reports.
Turnaround by service
Average days, this year
- Targeted quantification (LC-MS/MS)14 days
- Accurate mass (HRMS)3 days
- Compound identification10 days
- GC-MS analysis10 days
On the instruments
Record each system suitability run with its result. A failed check emails the managers.
Triple quadrupole LC-MS/MS 1
QC checks
- Pass
Run the system suitability standard
Oct 24, 8:05 AM · Elena Rossi
- Pass
Run the system suitability standard
Oct 17, 8:12 AM · Marcus Lee
Everyone who books Triple quadrupole LC-MS/MS 1 sees the last result.
Managers are reminded of source cleaning, ICP-MS cones, and service visits. Downtime tells the people booked.
Maintenance plans
11 plans
- Due Oct 18
Run the system suitability standard
every week
- Due Oct 22
Mass calibration
every week
- Due Nov 8
Tune and calibrate
every month
- Due Dec 19
Clean the ion source
every month
Questions
Mass spectrometry core questions
Can chemists run their own samples?
Yes. After training, they add samples to the walk-up LC-MS queue with the minutes each needs. Runs go in order, one at a time, around reservations, and runs longer than the limit you set wait for the night queue. Each run is billed like a session for the minutes it takes.
Can we record QC on each batch?
Yes. Staff choose a check, such as the calibration curve or QC sample accuracy, and mark each sample pass or fail with a value and a note, or record one result for the whole request. Each service lists its usual checks to choose from. The researcher sees the results on the request.
How is method development billed?
By the hour. Staff log their time on the request by stage, and the hours are billed at the rate for the researcher’s price group. The staff time report shows the hours by person, stage, and service.
How do we report productivity and quality?
Reports show the requests and samples completed and the turnaround for each service, staff hours by person and stage, and QC pass rates by check, instrument, and month, for any period. Download any table as CSV.
Does it work with our finance system?
Completed requests, queued runs, and sessions go on a monthly statement for each project or account, locked once final. The journal file lists each finalized line against the payer’s account and your revenue account, for the business office to post.
Run your mass spectrometry core in one place.
Every new workspace includes the Core plan for 30 days. After that, booking stays free; rates, invoices, and service requests need the Core plan.













